Ricoh Russian-C2a - Page 180

10 August, 2001 SERVICE PROGRAM MODE
4-17
Service
Tables
2
Mode Number/Name Function/[Setting]
Erase Margin Adjustment
1 Leading Edge Adjusts the leading edge erase margin.
The specification is 3
±
2 mm. See “Replacement and
Adjustment - Copy Adjustment” for details.
[0.0 ~ 9.0 / 3.0 / 0.1 mm/step]
2 Trailing Edge – Small
Paper Size
Adjusts the trailing edge erase margin for paper of
length 216 mm or less.
The specification is 3
±
2 mm. See “Replacement and
Adjustment - Copy Adjustment” for details.
[0.0 ~ 9.0 / 2.0 / 0.1 mm/step]
3 Trailing Edge – Middle
Paper Size
Adjusts the trailing edge erase margin for paper of
length 216.1 ~ 297 mm.
The specification is 3
±
2 mm. See “Replacement and
Adjustment - Copy Adjustment” for details.
[0.0 ~ 9.0 / 3.0 / 0.1 mm/step]
4 Trailing Edge – Large
Paper Size
Adjusts the trailing edge erase margin for paper longer
than 297 mm.
The specification is 3
±
2 mm. See “Replacement and
Adjustment - Copy Adjustment” for details.
[0.0 ~ 9.0 / 4.0 / 0.1 mm/step]
5 Left Side Adjusts the left edge erase margin.
The specification is 2
±
1.5 mm. See “Replacement
and Adjustment - Copy Adjustment” for details.
[0.0 ~ 9.0 / 2.0 / 0.1 mm/step]
6 Right Side Adjusts the right edge erase margin.
The specification is 2
+
2.5/-1.5 mm. See
“Replacement and Adjustment - Copy Adjustment” for
details.
[0.0 ~ 9.0 / 2.0 / 0.1 mm/step]
7 Rear – Trailing Edge
Adjusts the trailing edge erase margin on the reverse
side of duplex copies.
The actual trailing edge erase margin on the reverse
side is this value plus the value of SP2-101-2 or 3 or 4.
The specification is 3
±
2 mm. See “Replacement and
Adjustment - Copy Adjustment” for details
[0.0 ~ 9.0 / 1.2 / 0.1 mm/step]
8 Rear – Left Side Adjusts the left side erase margin on the reverse side
of duplex copies.
The actual left side erase margin on the reverse side is
this value plus the value of SP2-101-5.
The specification is 2
±
1.5 mm. See “Replacement
and Adjustment - Copy Adjustment” for details.
[0.0 ~ 9.0 / 0.3 / 0.1 mm/step]
101*
9 Rear – Right Side Adjusts the right side erase margin on the reverse side
of duplex copies.
The actual right side erase margin on the reverse side
is this value plus the value of SP2-101-6.
The specification is 2 +2.5/–1.5 mm. See
“Replacement and Adjustment - Copy Adjustment” for
details.
[0.0 ~ 9.0 / 0.3 / 0.1 mm/step]