9 November, 2001 SP MODE SETTINGS
APPENDIX-3
1.2 SP MODE SETTINGS
After installing the machine and line adapter, change the value of SP5-816 (CSS
Function) to 1.
Check the values of the following SP modes. Ensure they are set correctly.
NOTE: SP5-507 is only for the Japanese version. Do not change.
• SP5-501-1 (PM Alarm Interval): 120k
• SP5-504 (Jam Alarm Setting): 3
• SP5-505 (Error Alarm Setting): 50
• SP5-508-1 (CC Call – Remain of Jam): 1 (On)
• SP5-508-2 (CC Call – Continuous Jam Occurrence): 1 (On)
• SP5-508-3 (CC Call - Cover Open): 1 (On)
• SP5-508-4 (New CC Call Mode): 1 (New Mode)
1.3 CHECKING ITEMS USING RSS
1.3.1 READ ONLY ITEMS
Item
Paper end
Toner end
Staple end
Toner near end
Door open
Paper jam information
Machine condition
Paper size information
System configuration
Vsg, Vsp, Vsdp, Vt data
Fax information (Total No. of Tx, Total No. of Rx, Quick dial, Speed dial, etc)
Printer information (Total No. of print by Emulation, Bit switches, etc)
SP7-001~-003, -101, -204~-206, -301~-305, -320~-328, -401, -403, -502~-507, -801, -803
To Next Page
Loading...
