Ricoh SP 150w - Page 92

10. Printer Congurations (WEB page)
90
3. Check and change the TCP/IP settings.
Click the “Settings” tab to set up the hostname, IP mode, IP address, subnet mask, and gateway
in the “TCP/IP settings”. Click the “Apply” button to enable the changes of the printer settings.
If you select “Automatically acquire IP address” for the IP mode, then the wireless network router
will assign the IP address, subnet mask, and gateway. You cannot make changes.
If you select the manual option, then you can change the IP address, subnet mask, and gateway.
4. CheckandchangeBonjour(mDNS)settings.
Click the “Settings” tab to set up the hostname and the printer name in the “Bonjour (mDNS)
settings”. Click the “Apply” button to enable the changes of the printer settings.