91
5. Check and change wireless settings.
Click the “Settings” tab to set up the wireless parameters of the printer in the “Wireless settings”.
Click the “Apply” button to enable the changes of the printer settings.
6. Check and change hotspot settings.
Click the “Settings” tab to set up the hotspot parameters of the printer in the “Soft AP Settings”.
Click the “Apply” button to enable the changes of the printer settings.
You can turn on or turn off the printer hotspot by ticking the “Enabled” option. You can set up the
SSID and connected network password of the printer hotspot.
7. Check and change administrator password settings.
Click the “Settings” tab to set up the administrator password in the “Administrator password
settings”. Click the “Apply” button to enable the changes of the printer settings.
To Next Page
Loading...
