SNMP
Item Description
SNMP Select whether SNMP is active or inactive for the interface board(s).
SNMPv1,v2 Setting
Item Description
SNMPv1 Trap
Communication
Select whether to send SNMPv1 trap.
SNMPv2 Trap
Communication
Select whether to send SNMPv2 trap.
Community
Item Description
Community Name Enter the name of the community to which the network interface board belongs,
using up to 15 characters. If the community name is different from that of the
hosts, requests from the hosts will not be accepted.
Access Type In the list, select the access rights to the community.
• Not Accessible
No access permitted.
• read-only
You can read the information, but not edit it.
• read-write
You can read and edit the information.
• trap
Notifies the manager with information about errors. Enter the recipient of
the error notification in the Manager Address box.
Using Web Image Monitor
45
To Next Page
Loading...
