Item Description
Protocol, Active/
Inactive
Configure settings for each protocol used by the community.
Manager Address Enter the host computer's address according to the protocol in use.
Configuring the Administrator Password
Click [Administrator Settings] to specify the administrator password.
Administrator Settings
Item Description
Current Password Enter the current administrator password. The default is "admin133".
New Password Enter the new administrator password. You can enter it using three to eight
characters.
Confirm Password Enter the same password again, to confirm.
Resetting the Machine’s Settings
Click [Restore Defaults] to reset the settings and administrator password.
Checking the Machine Information
Click [Machine Information] to display machine information.
4. Configuring the Machine Using Utilities
46
To Next Page
Loading...
