Message Causes Solutions
Memory Overflow
1: TX 2: Cancel
• If this occurs on the first
page:
The machine's memory
reached capacity while
storing a fax in memory
before transmission.
• If this occurs on the second
or a later page:
Memory has reached
capacity while scanning
the second or later pages
of the original when trying
to send a fax in Memory
Transmission mode.
• If this occurs on the first page:
Resend the fax in parts as several
smaller individual faxes, or send at a
lower resolution.
• If this occurs on the second or a later
page:
Press the [1] key (TX) to send only the
pages that have been scanned in
memory, or press the [2] key
(Cancel) to cancel.
RX Memory
Overflow
The memory has become full or
the maximum number of
receivable files has been
reached during fax reception.
• The received fax was too large. Ask
the sender to resend the document in
parts as several smaller individual
faxes, or to send at a lower
resolution.
• If an error has occurred because of a
problem such as lack of paper, paper
jamming, or toner running out, correct
the problem, and then finish printing
the outstanding files.
• If there is a file waiting to be sent,
complete the transmission or delete
the file.
Memory Data Lost
Data in the memory was deleted
due to a memory fault.
The machine prints Power Failure Report
and recovers from the error automatically.
Cancel Printing
I/O Timeout
The timeout period set in [I/O
Timeout] expires when printing
is frequently interrupted by data
from other ports, or when the
print job is large and takes time
for processing.
Set [I/O Timeout] to a larger value than
the current setting. For details, see
page 119 "Printer Features Settings".
Error and Status Indicate on the Control Panel
167
To Next Page
Loading...
