Message Causes Solutions
Communication Error
#### Server
The connection with the FTP/
SMTP/SMB server was lost
while sending or receiving data.
If the problem involves the FTP/SMB
server, check the [Edit Network Scan
Destination] setting in Smart Organizing
Monitor.
If the problem involves the SMTP server,
check the [Server Properties...] setting in
Smart Organizing Monitor.
Invalid Password
#### Server
The password entered to access
the FTP/SMTP/POP3/SMB
server is invalid.
For future reference, make a note of the
correct password and keep it safe.
Failed To Connect
#### Server
A connection with the FTP/
SMTP/POP3/SMB server is
failed.
If the problem involves the FTP/SMB
server, check the [Edit Network Scan
Destination] setting in Smart Organizing
Monitor.
If the problem involves the SMTP/POP3
server, check the [Server Properties...]
setting in Smart Organizing Monitor.
File Over
The assigned file names range
from SIG000101 to
SIG999901. If the file name
assignment passes SIG999901,
the naming starts over from
SIG000101. If the name of the
new file is the same as an
existing file for the same
destination, the new file cannot
be stored.
Remove or rename the existing file of the
same name.
Page Over
You can only scan up to 99
pages at a time.
Set the number of pages to 99 or fewer.
#### Server Error
Data sent from the machine has
not been stored on the
FTP/SMB server.
Reduce the number of pages or send the
file at a lower resolution.
SMTP Server Full
The SMTP server's memory
reached capacity during e-mail
transmission.
Check the SMTP server setting.
Reduce the number of pages or send the
file at a lower resolution.
Error and Status Indicate on the Control Panel
169
To Next Page
Loading...
