Ricoh SP 211SF - Quick Install for USB

10
Quick Install for USB
Do not turn the machine on until prompted to do so in the installer window. If you connect the machine to the •
computer when it is on, you will be unable to install the driver correctly.
DCT070
Do not connect the USB cable to the machine until prompted to do so in the installer window. If you connect •
the machine to the computer before the prompt appears, the machine will be identified prematurely by the
computer and you will be unable to install the driver correctly.
CXP122
Make sure the machine is off.
Turn on the power of the computer.
Insert the CD-ROM into the CD-ROM drive.
CXP066
Select a language and product for the interface, and then click [OK].
Click [USB Quick Install].
If WPS cannot be used with SP 212w/SP 212Nw/SP 213w/SP 213Nw, click [Smart Organizing Monitor].
DCT045