Resolution
Specifies the resolution for scanning the original.
Default: [300 × 300dpi]
• 100 × 100dpi
• 150 × 150dpi
• 200 × 200dpi
• 300 × 300dpi
• 400 × 400dpi
• 600 × 600dpi
Compression (Color)
Specifies the color compression ratio for JPEG files. The lower the compression ratio, the higher the
quality but greater the file size.
Default: [Medium]
• Low
• Medium
• High
Limitless Scan
Sets the machine to request next originals when scanning with the exposure glass.
Default: [Off]
• Off
• On
File Type
Specifies whether to create a multi-page file containing all pages or separate single-page files
when scanning multiple pages.
Note that a scanned file can contain multiple pages only when the file format is PDF or TIFF. If the
file format is JPEG, a single-page file is created for each scanned page.
Default: [Multi-page]
• Multi-page
A multi-page file containing all pages is created.
• Single Page
A single-page file is created for each page.
7. Configuring the Machine Using the Control Panel
136 opal-p2_mf2_com_user_guide_00142121_eng.xml
To Next Page
Loading...
