Print Area
The diagram below shows the area of the paper that the machine can print on.
From the printer driver
1. Print area
2. Feed direction
3. Approx. 4.2 mm (0.2 inches)
4. Approx. 4.2 mm (0.2 inches)
• The print area may vary depending on the paper size and printer driver settings.
•
Adjust the print position by specifying [Printer Registration] in [System Settings].
•
To adjust the print position, specify [Registration: Tray 1] or [Registration: Bypass Tray] on
the [Maintenance] tab in Smart Organizing Monitor.
2. Loading Paper
42 opal-p2_mf2_com_user_guide_00142084_eng.xml
To Next Page
Loading...
