Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary according to your network environment.
• IP Address Method
Displays the IP address acquisition method.
• IP Not Ready
• DHCP
• Manual Config.
• Default IP
IPv6 Configuration
• IPv6
Select whether to enable or disable IPv6.
Default: [Inactive]
• Active
• Inactive
• DHCP
Sets the machine to receive its IPv6 address from a DHCP server.
Default: [Active]
• Active
• Inactive
• IP Address (DHCP)
Displays the IPv6 address obtained from a DHCP server.
• Manual Config. Address
• Manual Config. Address
Specifies the machine's IPv6 address when DHCP is not used. Can contain up to 39
characters.
For details about entering characters, see page 103 "Entering Characters".
• Prefix Length
Specifies the prefix length, using a value between 0 and 128.
• Gateway Address
Specifies the IPv6 address of the default gateway. Can contain up to 39 characters.
For details about entering characters, see page 103 "Entering Characters".
• Stateless Address
Displays the IPv6 stateless addresses obtained from a Router Advertisement.
Network Settings
opal-p2_mf2_com_user_guide_00142128_eng.xml 157
To Next Page
Loading...
Need help?
General
