Problem Solution
Cannot print received faxes. • Tray 1 is empty. Load paper in Tray 1. See page 45
"Loading Paper".
• Tray 1 does not contain paper of the right size. Load
paper of the right size in Tray 1.
Faxes you sent appear spotty or
dirty when received.
• The exposure glass or ADF is dirty. See page 208
"Cleaning the Auto Document Feeder".
• Before placing originals on the exposure glass, make
sure that ink or correction fluid is dry.
A fax you sent appears blank
when received.
The original was placed upside down. Place the original in
the correct orientation. See page 54 "Placing Originals".
Dirty spots may appear, or an
image from the reverse side shows
through copy received by the
recipient.
Image density is too high. Adjust the image density.
Dial fails when trying to send
faxes.
Check the error code, and then perform the appropriate
procedure to resolve the problem.
Fax Problems
opal-p2_mf2_com_user_guide_00142155_eng.xml 225
To Next Page
Loading...
Need help?
General
