Item Setting Description
Name Required Name of the destination. The name specified here will
be shown on the screen when selecting a scan
destination. Can contain up to 16 characters.
Hostname or IP Address Required Name or IP address of the FTP server. Can contain up
to 64 characters.
File Format (Color/Gray
Scale)
Required File format of the scanned file when scanning in color.
PDF or JPEG can be selected. PDF supports multiple
pages in a document, but JPEG does not.
File Format (Black & White) Required File format of the scanned file when scanning in black
and white. PDF or TIFF can be selected. Both formats
support multiple pages in a document.
FTP User Name Optional User name for logging in to the FTP server. Can
contain up to 32 characters.
FTP Password Optional Password for logging in to the FTP server. Can contain
up to 32 characters.
Directory Optional Name of the FTP server directory where scanned files
are stored. Can contain up to 64 characters.
Notification E-mail Address Optional E-mail address to which a notification is sent after
transmission. Can contain up to 64 characters.
Scan Size Optional Select the scanning size for the original from A5, B5,
A4, Executive, Half Letter, Letter, Legal, 16K, or
custom size.
If you select custom size, select [mm] or [Inch], and
then specify the width and length.
Resolution Optional Select the scan resolution from 100×100, 150×150,
200×200, 300×300, 400×400, or 600×600 dpi.
Density Optional Specify the image density by clicking the right or left
buttons. These keys increase or decrease the image
density in single increments up to 5.
Registering Scan Destinations
opal-p2_mf2_com_user_guide_00142099_eng.xml 83
To Next Page
Loading...
Need help?
General
