8. Click [Scan].
9. Click [Close].
Settings you can configure in the TWAIN dialog box
1. Scanner:
Select the scanner you want to use. The scanner you select becomes the default scanner. Click [Refresh] to
discover all available scanners connected via USB or the network.
2. Original:
Select [Reflective] to scan from the exposure glass, or [Automatic Document Feeder] to scan from the ADF.
Scanning from a Computer
opal-p2_mf2_com_user_guide_00142103_eng.xml 97
To Next Page
Loading...
Need help?
General
