If you see this screen, proceed to the next step.
6. If you have more originals to scan, place the next original on the exposure glass, and
then press [Yes]. Repeat this step until all originals are scanned.
7. When all originals have been scanned, press [No] to start sending the scanned file.
• To cancel scanning, press the [Scanner] key, and then press the [Clear/Stop] key. The scan files
are discarded.
• You can also specify a destination using the One Touch buttons, [Pause/Redial] key (only SP
221SF, SP 220SFNw, and SP 221SFNw). For details, see page 109 "Specifying the Scan
Destination Using the One Touch Buttons or [Pause/Redial] Key".
Basic Operation of Scan to E-mail
105
To Next Page
Loading...
