Ricoh SP 220SNW - Control Panel

No. Name Description
13 Selection keys Press the key underneath an item shown on the bottom line of the
screen to select it.
14 Data In Indicator This indicator flashes blue when the machine receives print data
from the host device.
15 [Back] key Press to cancel the last operation or to return to the previous level
of the menu tree.
16 Alert Indicator This indicator lights up red when the machine runs out of paper or
consumables, when the paper settings do not match the settings
specified by the driver, or when other errors occur. It flashes when
the toner is nearly empty.
17 [OK] Key Press to confirm settings and specified values, or to move to the
next menu level.
18 [Start] key Press to start fax transmission/reception, scanning, or copying.
Control Panel
SP 221SF, SP 220SFNw, SP 221SFNw
1234567 8 9 10 11 12 13
14 15 16 17 18 19 20 21 22 24
DSH108
23
No. Name Description
1 [On Hook Dial] key Press to use on-hook dialing to check the destination's status when
sending a fax.
2 [Address Book] key Press to select a scan or fax destination from the Address Book.
3 [Image Quality] key Press to select the scan quality for the current job.
4 [Shortcut to Func.] key Press to use the function pre-assigned to this key.
Guide to Components
21