Item Description
WEP Key Enter the WEP key. The number and type of characters you can enter vary
depending on the length and format selected for the key. See the following:
• WEP key length: [64bit], Format: [Hexadecimal]
WEP key max length: 10 characters (0-9, A-F, a-f)
• WEP key length: [64bit], Format: [ASCII]
WEP key max length: 5 characters (ASCII characters)
• WEP key length: [128bit], Format: [Hexadecimal]
WEP key max length: 26 characters (0-9, A-F, a-f)
• WEP key length: [128bit], Format: [ASCII]
WEP key max length: 13 characters (ASCII characters)
• If you are configuring the connection settings manually, check the SSID, authentication method, or
encryption key of the access point or wireless router in advance.
Wi-Fi Direct Settings
Item Description
SSID Enter the SSID name.
The SSID can contain up to 32 characters.
Google Cloud Tab
This function is available for only SP 220SNw, SP 221SNw, SP 220SFNw, and SP 221SFNw.
Google Cloud
Item Description
Google Cloud Print Specify whether to enable [Google Cloud Print]. When Google Cloud Print
is disabled, [Local Discovery] and [Timeout (seconds)] below cannot be
configured.
Registration Status Displays the status of Google Cloud Print registration.
Registration Account Displays the Account (e-mail address) of Google Cloud Print registration.
Local Discovery Specify whether to enable local discovery.
8. Configuring the Machine Using Utilities
222
To Next Page
Loading...
