Configuring the transmission mode
1. Press the [Facsimile] key, and then press the [ ] or [ ] key.
Alternatively, you can press the [Shortcut to Func.] key if [Shortcut to Function] under [Admin.
Tools] is set to [Fax Immediate TX]. For [Shortcut to Function], see page 187 "Administrator
Settings".
2. Press the [ ] or [ ] key to select [Immediate TX], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Off], [On], or [Next Fax Only], and then press the
[OK] key.
For Memory Transmission, select [Off].
For Immediate Transmission, select [On] or [Next Fax Only].
4. Press the [User Tools] key to return to the initial screen.
Basic Operation for Sending a Fax
• The original in the ADF takes precedence over the original on the exposure glass if you place
originals both in the ADF and on the exposure glass.
1. Press the [Facsimile] key.
6. Sending and Receiving a Fax
136
To Next Page
Loading...
