7. Configuring the Machine Using the
Control Panel
This chapter describes how to configure the machine using the control panel.
Some items might not appear, depending on the model type you are using.
Basic Operation
There are two main ways to access the machine settings:
• Press the [User Tools] key to access the system or network settings.
• Press the [ ] or [ ] key while in standby mode of each function to access the Copy, Scan, or Fax
settings.
To check which category the function you want to configure belongs to, see page 165 "Menu Chart".
1. If you want to configure the machine's system settings, press the [User Tools] key.
Otherwise, press the [ ] or [ ] key while "Ready" is displayed on the initial screen of the Copy,
Scan, and Fax settings.
2. Press the [ ] or [ ] key to select the settings you want to use.
For a list of available items, see page 165 "Menu Chart".
163
To Next Page
Loading...
