Configuring the Administrator Settings
Click [Administrator Tools] to display the page for configuring the administrator settings.
This page contains the following tabs: [Administrator], [Reset Settings], [Backup Setting], [Restore
Setting], [Set Date/Time], and [Energy Saver Mode].
Administrator Tab
Administrator Settings
Item Description
Change Password
(only SP 221SF, SP
220SFNw, and SP
221SFNw)
Check this to configure the administrator password.
New Password Enter the new administrator password. Can contain up to 16 characters.
Confirm New Password Enter the same password again, to confirm.
Change E-mail Address
(only SP 221SF, SP
220SFNw, and SP
221SFNw)
Check this to configure the administrator e-mail address.
Administrator E-mail
Address
(only SP 221SF, SP
220SFNw, and SP
221SFNw)
Enter the administrator e-mail address.
If the machine's e-mail address is not configured in the [SMTP] page, this
address will be used as the sender's address of e-mails sent from this
machine, such as notification e-mails. Can contain up to 64 characters.
Rest Settings Tab
Reset Settings
Item Description
Reset Network Settings Select to restore the following settings to their defaults:
• Settings under [Network Settings]
• Settings under the [Administrator] tab of [Administrator Tools]
Configuring the Administrator Settings
229
To Next Page
Loading...
