Ricoh SP 220SNW - Sending a fax after a conversation

• For details about selecting the transmission mode, see page 135 "Selecting Transmission Mode".
• For details about [Fax Number Confirmation], see page 187 "Administrator Settings".
• For details about [Operation], see page 172 "Fax Features Settings".
Sending a fax after a conversation
An external telephone allows you to send a fax after finishing your conversation without having to
disconnect and redial. This function is useful when you want to ensure that the fax has been received.
1. Place the original.
If [Operation] is set to [Easy Mode], you cannot send faxes using the exposure glass.
2. Press the [Facsimile] key.
DSH154
3. Pick up the handset.
4. Specify the destination using the external telephone.
5. When the other party answers, ask them to press their fax start button.
6. If you hear a high pitched tone, press the [Start] key.
DSH147
If [Operation] is set to [Easy Mode], Step 8 does not apply.
7. If the original is placed on the exposure glass, press [TX], and then press the [Start] key.
Sending a Fax
145