Item Description Value
Switch
Reception
Mode
Specifies the reception mode. • Fax Only
The machine automatically
answers all incoming calls in fax
reception mode.
• FAX/TEL(Mnl.)
The machine rings when it
receives incoming calls. The
machine receives faxes only
when you manually receive
faxes.
• FAX/TAD
The machine receives faxes
automatically when a fax call is
received. Otherwise, the
connected telephone answering
device answers the call.
Default: [Fax Only]
Auto Reduction Sets the machine to reduce the size of
a received fax if it is too large to print
on a single sheet of paper.
Note that the machine only reduces
the size down to 74%. If further
reduction is required to fit the fax on a
single sheet, it will be printed on
separate sheets without being
reduced.
• Off
• On
Default: [On]
Default may be [Off] depending on
the [Country] setting under [Admin.
Tools].
Total No. of
Rings (TAD)
Specifies the number of times the
external telephone answering device
rings before the machine starts to
receive faxes in FAX/TAD mode.
1 to 20 times, in increments of 1
Default: 5 times
Number of
Rings
Specifies the number of times the
machine rings before it starts to receive
faxes in Fax Only mode.
3 to 5 times
Default: 3 times
7. Configuring the Machine Using the Control Panel
174
To Next Page
Loading...
