Ricoh SP 220SNW - Communication Settings

Item Description Value
Delete
Selected File
To delete a fax job, select the desired
job, and then press the [OK] key.
Pressing the [Back] key exits to the
previous level of the menu tree without
deleting the fax job.
Delete All Files To delete the fax jobs, press the [OK]
key. Pressing the [Back] key exits to the
previous level of the menu tree without
deleting the fax jobs.
Communication Settings
Item Description Value
ECM
Transmission
Sets the machine to automatically
resend parts of the data that are lost
during transmission.
• Off
• On
Default: [On]
ECM
Reception
Sets the machine to automatically
receive parts of the data that are lost
during reception.
• Off
• On
Default: [On]
Dial Tone
Detect
Sets the machine to detect a dial tone
before the machine begins to dial the
destination automatically.
(Default may be [Not Detect]
depending on the [Country] setting
under [Admin. Tools].)
• Detect
• Not Detect
Default: [Detect]
Transmission
Speed
Specifies the transmission speed for the
fax modem.
• 33.6 Kbps
• 14.4 Kbps
• 9.6 Kbps
• 7.2 Kbps
• 4.8 Kbps
• 2.4 Kbps
Default: [33.6 Kbps]
7. Configuring the Machine Using the Control Panel
176