Ricoh SP 220SNW - Administrator Settings; Printing Lists;Reports

Item Description Value
Reset Settings Be sure not to clear the
settings by mistake.
• Reset All Settings
Resets the machine's settings to their defaults
except the following:
• Language settings
• Country settings
• Network settings
• Fax destinations
Press the [OK] key to execute. Press the [Back]
key to exit to the previous level of the menu
tree without clearing the settings.
• Reset Network Settings
Resets the network settings to their defaults.
Press the [OK] key to execute. Press the [Back]
key to exit to the previous level of the menu
tree without clearing the settings.
• Clear Address Book
Clears the fax Quick Dial/Speed Dial
destinations.
Press the [OK] key to execute. Press the [Back]
key to exit to the previous level of the menu
tree without clearing the destinations.
Shortcut to
Function
Assigns one of the following
functions to the [Shortcut to
Func.] key on the control
panel.
• ID Card Copy Mode
• Fax Immediate TX
• Select Scanner Dest.
Default: [ID Card Copy Mode]
Admin. Tools
Lock
Specifies a four-digit
password for accessing the
[Address Book], [Network
Settings], [Wi-Fi Setup
Wizard] and [Admin. Tools]
menus.
Do not forget this password.
• On (0000 to 9999)
• Off
Default: [Off]
7. Configuring the Machine Using the Control Panel
192