No. Name Description
1 Input Tray for the ADF Place stacks of originals here. They will feed in automatically. This
tray can hold up to 35 sheets of plain paper.
2 Auto Document Feeder
(Exposure Glass Cover)
The ADF is integrated with the exposure glass cover. Open this
cover to place originals on the exposure glass.
3 Line and TEL Port • Upper port: Port for external telephone connection.
• Lower port: G3 (analog) line Interface port for telephone line
connection.
4 USB Port For connecting the machine to a computer using a USB cable.
5 Ethernet Port For connecting the machine to the network using a network
interface cable.
6 Rear Cover Open this cover to remove jammed paper.
7 Tray Cover Attach this cover when you extend the tray.
8 Stop Fence Raise this fence to prevent paper from falling off.
9 Tray 1 This tray can hold up to 150 sheets of plain paper.
10 Bypass Tray This tray can hold one sheet of plain paper.
11 Front Cover Open this cover to replace the print cartridge or remove jammed
paper.
12 USB Flash Disk Port Insert a USB flash disk to store scanned files using the Scan to USB
function.
13 Control Panel Contains a screen and keys for machine control.
14 ADF Cover Open this cover to remove originals jammed in the ADF.
15 Exposure Glass Place originals here sheet by sheet.
• If it is difficult to take printed paper out of the output tray, you can lift the control panel and make it
easier to take the printed paper out.
1. Guide to the Machine
18
To Next Page
Loading...
