EasyManua.ls Logo

Ricoh SP 220SNW - Network Settings

Ricoh SP 220SNW
344 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Item Description Value
Gateway
Address
Specifies the machine's default
gateway address when DHCP is not
used.
Use this menu to check the current
default gateway address when DHCP
is used.
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary
according to your network
environment.
IP Address
Method
Displays the IP address acquisition
method.
IP Not Ready
DHCP
Manual Config.
Default IP
Wi-Fi Direct IP
Address
Displays the IP address of Wi-Fi Direct.
IPv6 Configuration
Item Description Value
IPv6 Select whether to enable or disable
IPv6.
Inactive
Active
Default: [Inactive]
DHCP Sets the machine to receive its IPv6
address from a DHCP server.
Inactive
Active
Default: [Active]
IP Address
(DHCP)
Displays the IPv6 address obtained
from a DHCP server.
7. Configuring the Machine Using the Control Panel
198

Table of Contents

Related product manuals