Ricoh SP 220SNW - Page 46

5. Press the [ ] or [ ] key to select [mm] or [inch], and then press the [OK] key.
6. Enter the width using number keys, and then press the [OK] key.
To enter a decimal point, press [ ].
7. Enter the length using number keys, and then press the [OK] key.
To enter a decimal point, press [
].
8. Press the [User Tools] key to return to the initial screen.
• You can press the [Back] key to exit to the previous level of the menu tree.
2. Paper Specifications and Adding Paper
44