5-15
Confidential
Emulation Changes the print language. The Function Menu setting becomes
valid. For data with ENTERLANGUAGE, this setting supersedes
the setting on the LCD.
Auto I/F Time Change the interface open time. This setting becomes valid when
PC print is instructed, and becomes invalid when PC-Scan or
Remote-SetUp is instructed.
Media Type Valid for printing from the computer only. When the Paper type is
set on the computer, the setting on the computer supersedes the
setting on the LCD. The default varies depending on the country
setting. “Thin” is the default for China and “Plain” is the default for
other countries.
Paper Size Changes the image development area. Sets the drawing size for
PC-Print, instead of the setting for Paper Size in the menu. When
the Paper size is set on the computer, the setting on the computer
supersedes the setting on the LCD. The default varies depending
on the country setting. “Letter” is the default for U.S.A. / Canada
and “A4” is the default for other countries.
Copies Valid for printing from the computer only. When the number of
copies is set on the computer, the setting on the computer
supersedes the setting on the LCD.
Orientation Changes the printing direction. Valid for printing from the computer
only.
P-Pos X-Offset Sets the print position offset in the X (landscape) direction. Valid for
printing from the computer only. When the X-Offset is set on the
computer, the setting on the computer supersedes the setting on
the LCD.
P-Pos Y-Offset Sets the print position offset in the Y (portrait) direction. Valid for
printing from the computer only. When the Y-Offset is set on the
computer, the setting on the computer supersedes the setting on
the LCD.
Auto FF Sets ON or OFF for AutoFF (automatic form feed). Valid for printing
from the computer only.
Auto FF Time Sets the time until timeout after AutoFF is set to ON.
FF Suppress Sets whether to skip blank pages. Valid for printing from the
computer only. On or Off setting of the blank data for copying
cannot be changed in this setting.
Auto LF Sets the auto linefeed.
Auto CR Sets the auto carriage return. Adds CR to the LF code.
Auto WRAP Sets the auto CRLF by the print width.
Auto Skip
Sets whether to skip at the back end / tip of paper. Adds a blank space.
Left Margin Sets the column space at the left side.
Right Margin Set the column space at the right side.
Top Margin Sets the space at the top.
Bottom Margin Sets the space at the bottom.
Lines Sets the number of lines in the PCL.
Error Print Sets the Error Print in the event of a BR-Script 3 error.
LCD Detail description
To Next Page
Loading...
