5.System Maintenance
112
[1 to 90 / 30 / 1 sec/step]
Specifies the send timeout interval when calling the RCG.
[0 to 100 / 30 / 1 sec/step]
Specifies the receive timeout interval when calling the RCG.
[0 to 100 / 30 / 1 sec/step]
If the HTTP connection fails, specify the interval at which the
connection will be retried again.[0 to 65535 / 3 / 1 sec/step]
If the HTTP connection fails, specify the number of times to
retry the connection.
[0 to 255 / 3 / 3 counts/step]
Specifies the connection request sending delay.
[0 to 255 / 5 / 1 sec/step]
Specifies the maximum number of multipart.
[0 to 10 / 10 / 1/step]
Sets the periodic notification mode.
[0 to 5 / 0 / 1/step]
Sets the counter notification mode.
[0 to 5 / 0 / 1/step]
Displays the periodic notification date and time.
Displays the counter notification date and time.
Displays the counter closing date and time.
Displays the next periodic notification date and time.
Displays the next counter notification date and time.
Displays the next counter closing date and time.
Displays the center control polling date and time.
Sets the test flag.
[0 to 255 / 0 / 1/step]
Displays the center information update results.
Specifies the margin to notify the proximity of the expiration
of the certification.
[2592000 to 15552000 / 2592000 / 1 sec/step]
Displays the date and time to notify the proximity of the
expiration of the certification.
Determines if the proxy server is used when the machine
communicates with the service center.
Inputs the address of the proxy server used for