5.System Maintenance
115
Displays the WiFi channel type.
Engine Service Setting
DFU (Designed for Factory Use).
[0x00 to 0x7F]
DFU
Sets the destination and updates the engine setting.
[DOM/ NA/ EU/ ASIA/ CHN/ TAIWAN]
DFU
Displays the current brand ID number.
[0x00 – 0x7F]
Adjusts the horizontal registration for each tray and paper type. If
the machine settings are reset to the factory defaults, this value
does not change.
[-40.0 to 40.0 / 1.0 (Default) / 0.1 mm/step]
[-40.0 to 40.0 / 17.0 (Default) / 0.1 mm/step]
[-40.0 to 40.0 / 17.0 (Default) / 0.1 mm/step]
[-40.0 to 40.0 / 17.0 (Default) / 0.1 mm/step]
[-40.0 to 40.0 / 2.0 (Default) / 0.1 mm/step]
[-40.0 to 40.0 / 17.0 (Default) / 0.1 mm/step]
[-40.0 to 40.0 / 17.0 (Default) / 0.1 mm/step]
[-40.0 to 40.0 / 17.0 (Default) / 0.1 mm/step]
[-40.0 to 40.0 / -5.0 (Default) / 0.1 mm/step]
[-40.0 to 40.0 / 17.0 (Default) / 0.1 mm/step]
[-40.0 to 40.0 / 17.0 (Default) / 0.1 mm/step]