Ricoh SP 3510SF - Adjusting Image Density; Selecting the Document Type

13
v Adjusting Image Density
You can adjust the image density for the current job.
Press the [Density] key.1.
Press the [ 2.
][ ] keys to select the desired density level, and then press the [OK] key.
(Lightest) (Darkest)
v Selecting the Document Type
You can select the best document type for the original that you are scanning.
Press the [Image Quality] key.1.
Press the [ 2. ][ ] keys to select the desired document type, and then press the [OK]
key.
For more details about the copier function, see “Using the Copier Function”, • User Guide.
If you would like to change the default settings of the machine, see “Configuring the Machine •
Using the Control Panel”, User Guide.
Text Photo
for originals with both
text and photographs
for originals with
text only
for originals with
photographs only
Mixed