30
Troubleshooting
v Images are too dark or too light on the copied pages or
scanned files
Image density is too dark or too light. Adjust the image density.
v Copied pages or scanned files are dirty
Ink or correction fluid on the original is not dry. Before placing originals on the expo-
sure glass, make sure that ink or correction fluid is dry.
v
The same area is dirty whenever making copies or scanning
files
The exposure glass or ARDF/ADF is dirty. Clean the exposure glass or ARDF/
ADF. Clean the parts indicated with arrows with a soft damp cloth and then wipe
the same parts with a dry cloth to remove any remaining moisture. For more details,
see “Cleaning”, User Guide.
Exposure Glass ARDF/ADF
CMF093
CMF094
Printing or Scanning Problems
To Next Page
Loading...
