27
Message
(alphabetical order)
Causes Solutions
Internal Misfeed
Paper has been
jammed in the
machine.
Remove the jammed paper.
See "Removing Paper Jams" on
page 32.
Memory Almost Full
Memory has almost
reached capacity dur-
ing sort copy.
If several originals are still to be
scanned, it is recommended to
start printing now, and copy the
remaining originals separately.
If originals are being scanned
from the ARDF or ADF, remove
any remaining pages from the
ARDF or ADF.
Misfeed: Bypass
Tray
Paper has been
jammed in the bypass
tray.
Remove the jammed paper.
See “Removing Paper Jams” on
page 32.
Misfeed: Dup. Unit
Remove Paper
Paper has been
jammed in the duplex
unit.
Remove the jammed paper.
See "Removing Paper Jams" on
page 32.
Misfeed: Stnd. Tray
Paper has been
jammed in the paper
exit area.
Remove the jammed paper.
See "Removing Paper Jams" on
page 32.
Misfeed: Tray 1
Paper has been
jammed in the tray 1
paper input area.
Remove the jammed paper.
See "Removing Paper Jams" on
page 32.
Misfeed: Tray 2
Paper has been
jammed in the tray 2
paper input area.
Remove the jammed paper.
See "Removing Paper Jams" on
page 32.
Out of Paper: X
The indicated tray has
run out of paper.
Load paper to the indicated
tray. See “Loading Paper”, User
Guide.
Print Cart. Set Error
The print cartridge
has not been installed
or has not been
installed correctly.
Reinstall the print cartridge. See
"Print Cartridge" on page 44.
To Next Page
Loading...
