Problem Causes Solutions
Misfeeds occur frequently. The tray's side or end fences
may not be set properly.
• Remove misfed paper. For details
about removing jammed paper,
see "Removing Jammed Paper",
Troubleshooting .
• Check that the side or end fences
are set properly. Also, check that
the side fences are locked. For
details about setting the side and
end fences, see "Changing the
Paper Size", Paper Specifications
and Adding Paper .
The machine makes a
clicking sound shortly after
the main power switch is
turned off.
The main power switch
makes a clicking sound
inside the machine when the
main power is turned off
automatically.
You will hear a clicking sound inside
the machine when it shuts down. This is
not a malfunction.
• If you cannot make copies as you want because of paper type, paper size, or paper capacity
problems, use recommended paper. For details about recommended paper, see "Recommended
Paper", Paper Specifications and Adding Paper .
When You Have Problems Operating the Machine
103
To Next Page
Loading...
