Reducing or Enlarging Originals
This section describes methods of reducing or enlarging images by specifying a reproduction ratio, or a
paper size.
Base Point
The base point of reduce/enlarge differs depending on how the original is scanned. When the
original is placed on the exposure glass, the upper left corner will be the base point. When it is
placed in the ADF, the bottom left corner will be the base point.
• Placing the original on the exposure glass
• Placing the original in the ADF
Preset Reduce/Enlarge
This function allows you to reduce or enlarge images by selecting a preset ratio.
Reducing or Enlarging Originals
35
To Next Page
Loading...
