4. Pinch the end guide and slide it inward to match the standard size.
5. Fan the paper before loading it in the tray.
6. Load the new paper stack print side down.
Make sure paper is not stacked higher than the upper limit (upper line) marked inside the tray.
7. Adjust the paper guides to close any gaps.
Do not move paper loaded in the tray more than a few millimeters.
Moving the loaded paper excessively can cause damage to paper edges on the openings of the
tray's lifting plate, resulting in sheets being folded or becoming jammed.
Loading Paper into Paper Trays
81
To Next Page
Loading...
