How to load envelopes
Types of envelopes Tray 1 Bypass tray
Side-opening
envelopes
• Flaps: closed
• Bottom side of envelopes:
toward the right of the
machine
• Side to be printed: face
down
• Flaps: closed
• Bottom side of envelopes:
toward the right of the
machine
• Side to be printed: face up
When loading envelopes, select "Envelope" as the paper types using both the User Tools and
printer driver, and specify the thickness of envelopes. For details, see "Printing on Envelopes", Print
.
Recommended envelopes
For information about recommended envelopes, contact your local dealer.
For details about the sizes of envelopes you can load, see page 88 "Recommended Paper Sizes
and Types".
• Load only one size and type of envelope at a time.
• To get better output quality, it is recommended that you set the leading-edge print margin to at least
15 mm (0.6 inches) and the other margins to at least 10 mm (0.4 inches) each.
• Output quality on envelopes may be uneven if parts of an envelope have differing thicknesses. Print
one or two envelopes to check print quality.
• Flatten out prints if they are creased or curled.
• Check the envelopes are not damp.
• High temperature and high humidity conditions can reduce print quality and cause envelopes to
become creased.
• Depending on the environment, copying or printing on envelopes may wrinkle them even if they
are recommended.
• Certain types of envelopes might come out creased, dirtied, or misprinted. If you are printing a
solid color on an envelope, lines may appear where the overlapped edges of the envelope make it
thicker.
Recommended Paper Sizes and Types
95
To Next Page
Loading...
Need help?
General
Weight and Dimensions
