Message Cause Solution
"User Paper Type Error" The printer does not recognize the
paper type specified using the
printer driver.
Check that the printer is
connected to the network
correctly and bidirectional
communication is enabled. If the
problem persists, confirm the user
paper type settings of the printer.
For details, see "Registering
Unique Names to Paper Types",
Operating Instructions.
"You do not have a
privilege to use this function.
This job has been
cancelled."
The entered Login User Name or
Login Password is not correct.
Check that the Login User Name
and Login Password are correct.
"You do not have a
privilege to use this function.
This job has been
cancelled."
The logged in user is not allowed
to use the selected function.
For details about how to set
permissions, see "Configuring
User Authentication", Security
Guide.
"You have no privilege to
use this func. Operation
canceld."
The logged in user does not have
the privileges to register programs
or change the paper tray settings.
For details about how to set
permissions, see "Configuring
User Authentication", Security
Guide.
Messages during Direct print from a memory storage device
Message Causes Solutions
"99: Error" This data cannot be printed. The
specified data is either corrupt or
not supported by the Direct
printing function from memory
storage devices.
Check that the data is valid. For
details about the kinds of data
supported by the Direct printing
function from memory storage
devices, see "Direct Printing from
a Memory Storage Device",
Operating Instructions.
If printing does not start, contact your service representative.
• The contents of errors may be printed on the Configuration Page. Check the Configuration Page in
conjunction with the error log. For details about how to print the Configuration Page, see "Test
Printing", Operating Instructions.
3. Troubleshooting
78
To Next Page
Loading...
Need help?
General
Weight and Dimensions
