IOS APP Instruction
3.1 Mobile Phone APP Installation
3.1.1 APP Download
Apple APP only supports IOS10.0-14.3, iphone6 and above models, search for
"RDPower" in the Apple store to download. If you must use the software function,
please pre-install the test first. To use the WiFi function of the software, you need to
apply for location service. Please agree and turn on location in Settings-Privacy. This
manual corresponds to the software version 1.1.11, it is recommended to upgrade to
the latest software for a better user experience.
3.2 Installation and Operation
When the software is started for the first time, the system may apply for positioning (as shown in
Picture 19), select "Allow when using APP", and apply for data when the software is running (as
shown in Picture 20), select "Wireless LAN and cellular mobile network".
To Next Page
Loading...
