300 Compact Pipe and Bolt Threading Machine
Ridge Tool Company 17
Service and Repair
WARNING
Service and repair work on this Threading Machine
must be performed by qualified repair personnel.
Machine should be taken to a RIDGID Independent
Authorized Service Center or returned to the fac-
tory. All repairs made by Ridge service facilities
are warranted against defects in material and
workmanship.
WARNING
When servicing this machine, only identical
replacement parts should be used. Failure to
follow these instructions may create a risk of
electrical shock or other serious injury.
If you have any questions regarding the service or repair
of this machine, call or write to:
Ridge Tool Company
Technical Service Department
400 Clark Street
Elyria, Ohio 44035-6001
Tel: (800) 519-3456
E-Mail: TechServices@ridgid.com
For name and address of your nearest Independent
Authorized Service Center, contact the Ridge Tool
Company at (800) 519-3456 or http://www.ridgid.com
Wiring Diagrams
Neutral
Ground
Blue
White
Red
Yellow
Green
Black
White
115/230V Far East
Green
Neutral
Earth
Foot Switch
Suppressor
230V 25-60 Hz
To Next Page
Loading...
