3
20148646
Declarations
1 Declarations
Declaration of conformity in accordance with ISO / IEC 17050-1
Manufacturer: RIELLO S.p.A.
Address: Via Pilade Riello, 7
37045 Legnago (VR)
Product: Dual fuel light oil/ gas burners
Model and type: RLS 28
RLS 38
RLS 50
684 T1
685 T1
686 T1
These products are in compliance with the following Technical Standards:
EN 676
EN 267
EN 12100
and according to the European Directives:
GAR 2016/426/EU Gas Appliances Regulation
MD 2006/42/EC Machine Directive
LVD 2014/35/UE Low Voltage Directive
EMC 2014/30/EU Electromagnetic Compatibility
Such products are marked as follows:
The quality is guaranteed by a quality and management system certified in accordance with
ISO 9001:2015.
Declaration of Conformity A.R. 8/1/2004 & 17/7/2009 – Belgium
Manufacturer: RIELLO S.p.A.
37045 Legnago (VR) Italy
Tel. ++39.0442630111
www.rielloburners.com
Distributed by: RIELLO NV
Ninovesteenweg 198
9320 Erembodegem
Tel. (053) 769 030
Fax. (053) 789 440
e-mail. info@riello.be
URL. www.riello.be
This document certifies that the series of devices specified below is in compliance with the model described in the EC Declaration of Conformity
and has been manufactured and distributed in compliance with the requirements defined in the Legislative Decree of January 8th 2004 and July
17th 2009.
Type of product: Dual fuel light oil/ gas burners
Model: RLS 28
RLS 38
RLS 50
Regulation applied: EN 267 and A.R. of January 8th 2004 - July 17th 2009
Controlling organisation: Kiwa Gastec Italia S.p.A.
Via Treviso, 32/34
31020 San Vendemiano (TV) - Italy
Values measured: LIGHT OIL
RLS 28 Max. CO: 13 mg/kWh
Max. NOx: 113 mg/kWh
RLS 38 Max. CO: 7 mg/kWh
Max. NOx: 157 mg/kWh
RLS 50 Max. CO: 9 mg/kWh
Max. NOx: 128 mg/kWh
GAS
Max. CO: 16 mg/kWh
Max. NOx: 90 mg/kWh
Max. CO: 5 mg/kWh
Max. NOx: 100 mg/kWh
Max. CO: 10 mg/kWh
Max. NOx: 104 mg/kWh
Legnago, 21.04.2018 General Manager
RIELLO S.p.A. - Burners Department
Research and Development Director
RIELLO S.p.A. - Burners Department
Eng. U. Ferretti Eng. F. Comencini
To Next Page
Loading...
