Riello RS 70 E - A Appendix - Accessories

63
20068428
GB
Appendix - Accessories
Long head kit
Spacer kit
Continuous purging kit
Soundproofing chamber kit
Output power regulator kit for modulating operation
With the modulating operation, the burner continually adapts the
power to the heat request, ensuring a high level of stability for the
parameter controlled: temperature or pressure.
Two components should be ordered:
– the output power regulator to be installed on the burner;
– the probe to be installed on the heat generator.
Differential switch kit
Gas flange DN80 kit
A Appendix - Accessories
Burner
Standard head length
(mm)
Extended head length
(mm)
Code
RS 70/E 250 385 3010117
RS 100/E 250 385 3010118
RS 130/E 280 415 3010119
RS 190/E 372 530 3010443
RS 250/E MZ 370 520 3010412
Burner Thickness (mm) Code
RS 70-100-130/E 135 3010129
RS 190/E - RS 250/E MZ 102 3000722
Burner Code
RS 70-100-130-190/E
RS 250/E MZ
3010094
Burner Type dB(A) Code
RS 70-100-130-190/E
RS 250/E MZ
C4/5 10 3010404
Parameter to be checked Probe Output regulator
Adjustment field Type Code Type Code
Temperature - 100 ÷ 500° C PT 100 3010110
RWF50
RWF55
20099869
20099905Pressure
0 ÷ 2.5 bar 4 ÷ 20 mA 3010213
0 ÷ 16 bar 4 ÷ 20 mA 3010214
0 ÷ 25 bar 4 ÷ 20 mA 3090873
Burner Code
RS 70-100-130-190/E
RS 250/E MZ
3010329
Burner Code
RS 70-100-130-190/E
RS 250/E MZ
3010439