3.7. AntScope menus
• File
New – discard old measurement, create new
Open… – open existing file
Save – save measurement results
Save as… – save measurement results, give a new name to the file
Import from
CSV file… – load data from a CSV file exported by
other programs
Touchstone file… – load data from a Touchstone S1P file
Export to
CSV file… – save results (frequency, R and X) to a CSV file
(contents of the csvheader.txt file will be added
as a header; by default this file contains a header
for the Zplots program)
NWL file… – save results (frequency, R and X) to an NWL file
Touchstone file… – save results to Touchstone
S1P file in different formats
Read from analyzer… – read a graph from the analyzer memory
Print – print current graph
Print preview – preview printing
Print setup… – open printer setup window
Exit – close the program window
10
To Next Page
Loading...
