Software manual
RigExpert Antenna Analyzer can be connected to a computer running Windows
2000/2003/XP/Vista/7/8/10, as well as Mac OS (version 10.6 or higher) operating
systems.
The latest version of the software may be found at the Downloads section of the
rigexpert.com
website. Windows and Mac OS are available as separate downloads.
Important:
To avoid damage caused by possible electrostatic discharge,
always follow this sequence:
1. Connect the coaxial cable to the antenna connector of your
analyzer.
2. Connect the analyzer to the USB port of your computer.
4
1. Connecting RigExpert
Antenna Analyzer to your
computer
To Next Page
Loading...
