Rigol DG1012 Service Guide

Chapter 1 Disassembly and Assembly RIGOL
DG1000 Service Guide
1-1
Chapter 1 Disassembly and Assembly
Notices to Disassembly and Assembly
Notices:
 Do not disassemble the instrument unless for working requirement.
 Only authorized personnel are allowed to disassemble the instrument.
 Cut off the power supply before disassembling the instrument.
 Please wear anti-static wrist strap or make other anti-static precaution when
disassembling the instrument.
 Please use proper tools and follow the correct steps.
 Take care not to deform the metal structure or get hurt when disassembling the
metal structures.
 To avoid causing damage to the instrument due to improper operation and to
save your time, we recommend you to follow the disassembly steps and methods
in this guide manual.
Required Tools:
 Phillips screwdriver T20 and T10
 BNC socket wrench
WARNING
Ensure that the power supply is cut off before disassembling the
instrument. Only well-trained professional personnel or qualified
personnel are allowed to disassemble the instrument.
Note:
DG1000 series dual-
channel function/arbitrary waveform generator consists of two
models: DG1022 and DG1022A. In this manual, DG1022 is taken as an example for
illustration and the contents are also applicable to DG1022A.

Rigol DG1012 Specifications

General

Brand	Rigol
Model	DG1012
Category	Portable Generator
Language	English