Rigol DM3000 Series - To Disassemble and Assemble; Handle, Rear Panel and Metallic Shell

RIGOL
Service Guide for DM3000 Series
5-5
To Disassemble and Assemble
Handle, Rear Panel and Metallic Shell
Grip both side of handle and pull it outward, then rotate the handle to the desired position in
order to take it away. See figure 5-3. The disassembly method of rear panel and metallic shell
is shown in the figure 5-4, figure 5-5.
Figure 5-3 The Schematic of Disassembling and Assembling Handle