Rigol DM3058 - Page 122

RIGOL
Programming Guide for DM3058
5-6
Explanations:
Firstly, do enable calculation function (CALCulate:STATe□ON) and select limit
function (CALCulate:FUNCtion□DB) to run the command.
CALCulate:DB:REFerence □ {<value> | MINimum | MAXimum}: Set the
reference value of dB.
CALCulate:DB:REFerence?□{MINimum | MAXimum}: Query the reference value
of dB.
MIN = -120 dB, MAX = 120 dB, DEF = 0 dB.
Return Format:
The query returns the reference value of dB.
6. CALCulate:DBM:REFerence
Command Format:
CALCulate:DBM:REFerence□{<value> | MINimum | MAXimum}
CALCulate:DBM:REFerence?□{MINimum | MAXimum}
Function:
The command sets or queries the reference value of dBm.
Parameters:
Name
Type
Range of Values
Default
<value>
Consecutive Integer
2~8000
600
Explanations:
Firstly, do enable calculation function (CALCulate:STATe□ON) and select limit
function (CALCulate:FUNCtion□DBM) to run the command.
CALCulate:DB:REFerence□{<value> | MINimum | MAXimum}: Set the reference
value of dBm.
CALCulate:DB:REFerence?□{MINimum | MAXimum}: Query the reference value
of dBm.
MIN = 2 ohms, MAX = 8000 ohms, DEF = 600 ohms.
Return Format:
The query returns the reference value of dBm.