Rigol DM3058

RIGOL
Programming Guide for DM3058
5-10
Explanations:
Firstly, do enable calculation function (CALCulate:STATe□ON) and select limit
function (CALCulate:FUNCtion□AVERage) to run the command.
The peak-to-peak value of statistical data can be queried at any time.
Return Format:
The query returns the peak-to--peak value of statistical data.
14. CALCulate:AVERage:SDEViation?
Command Format:
CALCulate:AVERage:SDEViation?
Function:
The command queries the standard deviation of statistical data.
Explanations:
Firstly, do enable calculation function (CALCulate:STATe□ON) and select limit
function (CALCulate:FUNCtion□AVERage) to run the command.
The standard deviation of statistical data can be queried at any time.
Return Format:
The query returns the standard deviation of statistical data.