Rigol DM3058 - Page 125

RIGOL
Programming Guide for DM3058
5-9
CALCulate:AVERage:MAXimum?
Function:
The command queries the maximum of statistical data.
Explanations:
Firstly, do enable calculation function (CALCulate:STATe□ON) and select limit
function (CALCulate:FUNCtion□AVERage) to run the command.
The maximum of statistical data can be queried at any time.
Return Format:
The query returns the maximum of statistical data.
12. CALCulate:AVERage:MINimum?
Command Format:
CALCulate:AVERage:MINimum?
Function:
The command queries the minimum of statistical data.
Explanations:
Firstly, do enable calculation function (CALCulate:STATe□ON) and select limit
function (CALCulate:FUNCtion□AVERage) to run the command.
The minimum of statistical data can be queried at any time.
Return Format:
The query returns the minimum of statistical data.
13. CALCulate:AVERage:PTPeak?
Command Format:
CALCulate:AVERage:PTPeak?
Function:
The command queries the peak-to-peak value of statistical data.